<i id="nlv09"><bdo id="nlv09"><li id="nlv09"></li></bdo></i>
    1. <u id="nlv09"><bdo id="nlv09"></bdo></u>

    2. <u id="nlv09"></u>

    3. 連云港宇航石化設備制造有限公司,鶴管,汽車鶴管,內浮盤,浮盤.   contact us:086-153 1211 3188
          Home  |  About us  |  Product  |  Contact us 中文網站
      連云港宇航石化設備制造有限公司產品分類
      Crane Tube
      Low Temperature Crane Tube
      Floating disc / inner floating disc
      Trestle/Trestle Work
      Oil Tank Accessories
      Floating oil outlet device
      Movable folding ladder
      連云港宇航石化設備制造有限公司聯系方式
      Contact us!
      Switchboard number:086-0518-85380151
      15312113188 Manager Zhu
       
        產品展示  product
       

      What is crane tube? (Brief introduction to crane tube)
      Usage: for transferring liquid products between trestle and car or train tank cars.
      Loading method: A. Tank car top open loading
      B. Tank car top closed loading
      C. Tank car bottom loading
      Balance method: counterweight balance, spring balance
      Drive method: manual, pneumatic
      Pipe material: carbon steel, stainless steel, carbon steel – polytetrafluoroethylene liner
      Sealing material: nitrile rubber, fluorine rubber, polytetrafluoroethylene
      Revolving joint: the sealing face is subject to build-up welding with stainless steel
      Specification: the standard design is DN50, DN80 and DN100. Other specification shall be designed and manufactured according to the user’s requirements.
      Design pressure: PN0.6~PN6.0MPa
      Design temperature: -196℃~200℃
      Optional accessories: automatic vacuum relief valve, manual vacuum relief valve, outer arm lock, inner arm reset lock, oil receiving box, globe valve, liquid level alarm system, heat tracing system.
      Selection principle: 1. select the model according to the brief diagram (see the selection example for selection method).
      2. Fill in the design conditions according to the crane tube design condition table.
      3. Select associated accessories.
      4. Select proper vertical pipe type and length C (describe whether to conduct subsurface loading).
       
      Land Liquid Loading Arm


      The land liquid loading arm (loading arm) is composed of rotating joints with good rotating flexibility and sealing performance and pipes, and it is a device used between the tank car and the trestle storage and transportation lines for the transmission of liquid medium.
      The key parts, i.e. rotating joints, are processed by precision numerically-controlled machine tools and they have the supporting structure with build-in double raceway, which rotates flexibly and is light and reliable. The outer ring adopts alloy steel while the inner ring adopts stainless steel or PTFE liner so as to ensure that the device can safely and reliably apply to high-temperature, low-temperature or highly-corrosive medium.
      The sealing ring adopts reinforced PTFE, and the lining stainless steel elastic supporting ring and sealing are polished, having excellent self-lubrication property and corrosion resistance.

       Instructions for model

      • ?Nominal diameter: Based on the diameter of the liquid-phase pipe of loading arm.
      • ?Code of using place: Letters AL means the loading and unloading work for train or truck tank.
      • ?Code of loading location: 1-Top loading 2-Bottom loading
      • ?Code of number of rotating joints: Calculating the rotating joints of liquid-phase pipe 4-4 rotating joints 5-5 rotating joints
      • ?Code of structure of gas-phase pipe: 0-No gas-phase pipe 1-Up-connected 2-Down-connected 3-Up-turning 4- Down-turning
      • ?Code of structure of liquid-phase pipe: 1-Up-connected 2-Down-connected 3-Up-turning 4- Down-turning

       Main models and diagrams of their structures

       Specifications / standards for design, manufacturing and acceptance

      - HG/T21608-96
      - H/QB1006-93
      - GB12459-90
      - GB 700
      - GB 3077
      - GB 8163
      - JB755-85
      - GB 308
      - GB 3323-87
      - DIN8563 T1
      - DIN8563 T2
      - DIN8563 T3
      - GB985-88
      - GB/T 8923-88
      - GB/T 13384-92
      Liquid Loading Arm
      Liquid Loading Arm – Manufacturing Part
      Steel Butt-Welding Seamless Pipe Fittings
      Standard Specification for Carbon Structural Steel
      Technical Requirements for Alloy Structure Steel
      Seamless steel Tubes for Liquid Service
      Technical Requirements for Forgings of Pressure Vessels
      Rolling Bearings -Steel Balls
      Methods for Radiographic Inspection and Classification of Radiographs for Fusion Welded Butt Joints in Steel
      General Tolerances for Welded Constructions – Dimensions for Lengths and Angles
      Quality Assurance during Welding, Requirements for Factories
      General Tolerances for Welded Constructions -- Dimensions for Shapes and Positions
      Basic Forms and Sizes of Weld Grooves for Gas Welding, Manual Arc Welding and Gas-shielded Arc Welding
      Rust Grades and Preparation Grades of Steel Surfaces before Application of Paints and Related Products
      General Specification for Packaging of Mechanical and Electrical Products

       Composition of structure

       Product features

      • The double-raceway rotating joints and the sealing rings having elastic clamp ensure the medium will not leak during loading;
      • The spring cylinder balancer equipped with neutral equilibrium makes the loading arm to be operated in a convenient and labor-saving way;
      • During the loading, it moves along with the tank within the normal moving range of tank;
      • When the loading arm is recovered, it is locked in the direction in parallel with the travelling direction of tank, occupying small space;
      • With rational structure, the smallest arm size can meet the most reasonable envelope scope.

       Main parameters

      • Applicable medium: Various liquid and gaseous products
      • Design temperature:-196℃-250℃
      • Nominal diameter: DN50-DN150
      • Design pressure: -0.08Mpa-6.0Mpa
      • Pipe material: Carbon steel, stainless steel, liner pipe
      • Work envelope scope
      • Key point for ordering: Please fill in the Loading Arm Design Data Sheet under the guidance of technicians of our company and provide related drawings.
      (crane tube) land type fluid handling arm


       AL1401

      Using place: Open loading work at the top of a tank truck; the pipe joint is downward
      Applicable medium: Crude oil, refined oil product, chemical medium
      Working pressure: 0.6Mpa-2.5Mpa
      Pipe material: 20#/304/316/ aluminum



       AL1402

      Using place: Open loading work at the top of a tank truck; the pipe joint is downward
      Applicable medium: Crude oil, refined oil product, chemical medium
      Working pressure: 0.6Mpa-2.5Mpa
      Pipe material: 20#/304/316/ aluminum



       AL1403

      Using place: Open loading work at the top of a tank truck; the pipe joint is upward
      Applicable medium: Crude oil, refined oil product, chemical medium
      Working pressure: -0.08Mpa-2.5Mpa
      Pipe material: 20#/304/316/ aluminum


       AL1412

      Using place: Open loading work at the top of a tank truck; the pipe joint is upward
      Applicable medium: Volatile and toxicant chemical medium
      Working pressure: 0.6Mpa-2.5Mpa
      Pipe material: 20#/304/316


       AL2503

      Using place: Closed loading work at the bottom of a train; the pipe joint is upward or sidewise
      Applicable medium: Low-fluidity medium, like crude oil
      Working pressure: -0.08Mpa/ self-flow
      Pipe material: 20#/304 aluminum joint


       AL2504

      Using place: Closed loading work at the bottom of a train; the pipe joint is upward or sidewise
      Applicable medium: Low-fluidity medium, like crude oil
      Working pressure: -0.08Mpa/ self-flow
      Pipe material: 20#/304 aluminum joint


       AL2543

      Using place: Closed loading work at the bottom of a truck; the pipe joint is sidewise
      Applicable medium: Liquid gas, liquid chlorine, liquid ammonia, etc.
      Working pressure: 1.0Mpa-4.0Mpa
      Pipe material: 20#/304/316


       AL1512

      Using place: Closed loading work at the top of a train; the liquid-phase pipe joint is downward or sidewise
      Applicable medium: Liquid gas, liquid chlorine, liquid ammonia, etc.
      Working pressure: 0.6Mpa-2.5Mpa
      Pipe material: 20#/304/316


       AL14.3 hydraulic pump type

      Using place: Open loading work at the top of a tank truck; the temperature is high and the medium is easy to volatilize
      Applicable medium: Light oil
      Working pressure: -0.08Mpa
      Pipe material: 20#/304/ aluminum pump


       Heat-tracing type

      Using place: Open loading work at the top of a tank truck; the medium has poor fluidity, and it shall be heated and kept warm
      Applicable medium: Crude oil, residual oil, pitch, etc.
      Working pressure: -0.08Mpa-2.5Mpa


       Liner type

      Using place: Open loading work at the top of a tank truck; the liquid-phase pipe joint is upward or downward
      Applicable medium: Highly-corrosive medium like strong acid or strong alkali
      Working pressure: -0.08Mpa-2.5Mpa
      Applicable models: AL1401 AL1402 AL1403


       Non-column type

      Using place: Various fluid loading environment; the installation site is narrow, not stopped or transformed
      Applicable medium: Various liquid medium
      Working pressure: -0.08Mpa--4.0Mpa
      Pipe material: All types of loading arms mentioned above

      Bottom loading arm
      This loading arm is a new product with proprietary intellectual property rights developed by our company based on the overseas and domestic market in recent years, meeting the safety and environmental protection requirements, and it can replace like products abroad.
      Lianyungang Aerospace Petrochemical Equipment Manufacturing Co., Ltd.
      Add:No. 20 South Road, Haizhou Economic Development Zone, Lianyungang, Jiangsu 0518-85380151 15312113188
      技術支持:信友科技 蘇ICP備07022253號
      久久国语视频对白_日韩超清精品无码AV影视_92国产精品午夜福利免费_欧美成人在线一区二区三区